CoLinkEx Cortex JTAG_SWD Debugger

Description

CoiNel CoLinkEx Debugger (designed as per OS CooCox CoLinkEx specs) is a low cost hardware debugging device that supports SW debugging for both ARM Cortex M3 and Cortex M0 based controllers.

The board comes with CooCox CoLinkEx driver installed enabling user to start with the debugging the moment they recieve the hardware.

The CooCox CoLinkEx Debugger supports following IDE

• Keil RealView MDK03 or higher (not include 4.13a)
• IAR Embedded Workbenchxx or higher
• CooCox CoIDE

Standalone Programmer: CooCox CoFlash

OS SUPPORT

• Windows SP3 XP/Windows Vista/Windows7

Features:

• Device Support: Cortex M0 and Cortex M3 based devices
• Supports JTAG (20 PIN Standard Box header 2.54mm) and SWD (10 PIN Box Header 1.27mm)
• Supports
  • CooCox CoFlash,
  • CooCox CoIDE
  • Keil RealView MDK
  • IAR Embedded Workbench
• Board Dimensions: 50 x 35 mm
• PCB: FR-4, 1.6 mm, Red soldermask.
• Open Source Design from CooCox

The PinOut of JTAG Connector is shown below

The pinout of SWD Connector is shown below

Product Deliverables

• CoiNel CoLinkEx Debugger Module
• USB Cable
• 1.27 mm 10 Pin Cable
• 2.54 mm 20 PIN Cable

Supported devices

JTAG Debugging:

NXP:

• LPC1751, LPC1752, LPC1754, LPC1756, LPC1758, LPC1759, LPC1763, LPC1764, LPC1765, LPC1766, LPC1767, LPC1768, LPC1769, LPC177x, LPC178x

Serial Wire Debugging:

NXP:

• LPC1111x101 LPC1111x201 LPC1112x101 LPC1112x201 LPC1113x201 LPC1113x301 LPC1114x201 LPC1114x301 LPC11C14x301 LPC11C12x301
• LPC1224x101 LPC1224x121 LPC1225x301 LPC1225x321 LPC1226x301 LPC1227x301
• LPC1311 LPC1313 LPC1342 LPC1343
• LPC1751 LPC1752 LPC1754 LPC1756 LPC1758 LPC1759 LPC1763 LPC1764 LPC1765 LPC1766 LPC1767 LPC1768 LPC1769

We have tested the board for NXP based Cortex M0 and Cortex M3 controllers.

The board also works for various controllers from ATMEL, ST, TI, Freescale, Toshiba, Energy Micro, Holtek and Nuvoton

The details are available here.

The CoLinkEx debugger is provided with the required firmware loaded.

CoiNel CoLinkEx Debugger is designed as per guidelines provided by CooCox that works on open source ARM development tools.